How to set up your Scandi Full Yona bed
What's in the box:
- 12 x Partition C
- 12 x Partition D
- 4 x Cover
- 2 x Connector Z
- 2 x Connector W
Section 1. Assemble the internal partitions for one quarter of the bed
What you'll need: 3 x Partition C, 3 x Partition D
1. Fold along the creases, ensuring the guide letters are hidden on the underside
2. Connect Partition D and Partition C pieces to form a grid
Click here for recommended method of assembling the grid
3. It should look like this when done
Section 2. Slotting in the cover
What you'll need: 1 x Cover, the grid you assembled in the last section
1. Ensure the cover is folded well along all the existing creases. The guide letters should be facing inward, they will not be visible on the outside of the bed
2. Align the 'X' and 'O' markings on the cover with the corresponding 'X' and 'O' markings on the partitions
3. Fold the bottom flaps of the cover, and tuck them underneath the grid. We will slot them in properly a little later
4. Fold the long flap into the corresponding slot, and fold the 3 shorter tabs into their slots
5. Flip the whole thing upside down, and you can now properly fold the flaps on the underside into their corresponding slots
6. Flip the whole thing upside down again, and fold in the small excess flap that says “FOLD IN” (there is no slot for this flap, it should just be loosely folded inwards)
Section 3. Repeat until you have 4 quarters
1. Repeat section 1 and 2 until you have 4 quarters of the bed base
Section 4. Put all the pieces together and set up your bed
1. Align the quarters to form your bed
2. Connect the quarters by inserting the four connectors
3. The Z connectors sit at the head and foot of the bed. They do not need to be folded, and just need to be squeezed in to connect the two quarters
4. The W connectors sit on the sides of the bed. They need to be folded along the crease, and slotted in
5. Set up your bed and you’re done!
